Tools needed for Kit 01 of the Foden.

View previous topic View next topic Go down

Tools needed for Kit 01 of the Foden.

Post  Steam Traction World on Tue 14 Feb 2012, 12:22 am

Adam asked about the tools required for the first kit.

The control models are now together for both the SWB and the C Type. Just waiting for the last item for the C Type.

Craig will hopefully post a couple of photos soon.

Tools used during construction of Kit 1:

4 angle grinder with flap wheel
Linisher, but could have used the file and/or angle grinder
Hole deburrer
Club hammer
Smooth flat file
Dremmel mini drill with drum sander
13mm spanner & socket
17mm spanner & socket
19mm spanner & socket
A couple of 1 coins for the swear box

Hope this helps. The kit should be dispatched Thursday, so just in time for the weekend. Ill put a letter in with the kit which will cover the contents of the next few kits whilst were waiting for patterns to be made.

Regards

Steve

Steam Traction World

Number of posts : 886
Location : Daventry UK
Registration date : 2008-06-18

View user profile http://www.steamtractionworld.co.uk

Back to top Go down

Re: Tools needed for Kit 01 of the Foden.

Post  Adam Brown on Tue 14 Feb 2012, 1:07 pm

Thanks Steve, looking forward to getting started

Adam Brown

Number of posts : 61
Location : Cambridge
Registration date : 2012-02-07

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum