Home
FAQ
Search
Memberlist
Usergroups
Register
Log inDesign so far
Page 2 of 2 • Share •
Page 2 of 2 • 
1, 2
Who fancies a crane engine?
Steve Traill on Sun 06 Sep 2009, 10:57 pm
Saw 'Old Tim' at Dorset, does anyone fancy turning there DCC Road Loco into one of the Burrell Crane engines. I intend to make one from my Road Loco and if there were a couple of others interested then it would keep overall costs down. I have drawings and lots of photos of Old Tim along with some measurements I took whilst crawling all over the winch gear etc. at Dorset.
Steve
Steve Traill- Number of posts: 34
Age: 52
Location: Illogan Redruth Cornwall
Registration date: 2008-06-29 
Names
Steve Traill on Mon 07 Sep 2009, 10:14 pm
Next to this old warhorse we'll have to call you young Tim! 
Steve Traill- Number of posts: 34
Age: 52
Location: Illogan Redruth Cornwall
Registration date: 2008-06-29 -
Re: Design so far
sonick45 on Thu 08 Oct 2009, 2:20 pm
Any more news on design etc....
My obsessed mind needs feeding...
Cheers
Nick
My obsessed mind needs feeding...
Cheers
Nick
sonick45- Number of posts: 39
Location: Barton-Le-Clay (Beds)
Registration date: 2009-01-26 -
Re: Design so far
gjudge on Thu 15 Oct 2009, 8:58 pm
Steve Traill wrote:
Saw 'Old Tim' at Dorset, does anyone fancy turning there DCC Road Loco into one of the Burrell Crane engines. I intend to make one from my Road Loco and if there were a couple of others interested then it would keep overall costs down. I have drawings and lots of photos of Old Tim along with some measurements I took whilst crawling all over the winch gear etc. at Dorset.
Steve
are you going to remove the pump off engine then and have two injectors cause i believe the 4"burrell design has a gear driven pump from just behined the flywheel just wondered
gjudge- Number of posts: 1
Location: parkgate
Registration date: 2009-10-14 -
Page 2 of 2 • 1, 2
Permissions of this forum:
You cannot reply to topics in this forum